Having a good weapon is nice. However, if you want the best from your gun, master the art of cleaning and maintaining it. With proper care, your weapon will work smoothly and effectively. It will also last longer. Therefore, cleaning it regularly is extremely important. The following guide is about weapon cleaning. If you like it, clean it.
Gun Barrel Brush
The first step involves dipping the brush in a good gun cleaning solution. From here, consider brushing the gun barrel. Let it cook. This process aims to clean the barrel and stop bad smells. Purchase a bore-based brush. It will do a fantastic job. Also, you can use pipe cleaners to clean your guns.
Clean Gunks From Frames
Use a paper towel and wipe any dirt off the gun housing. However, never use rubbing alcohol. Instead of preventing smudges, it will damage your gun. Also ensure the carpet you use is clean. Be careful when handling guards. They tend to catch dirt quickly. Avoid using solvents as they can damage your weapon.
Clean Rails, Slide
The third step is about cleaning the rails in addition to the slides. Here, consider picking up a Q-tip. From here, proceed to run it around the gun rail. Use multiple angles (that’s, when doing it on the gun slide) to remove accumulated dirt.
Spring Countdown
Step 4 involves working on fall back spring. Here, you are required to get your recoil spring. From here, scrub off the dirt using a dry rug. If you can, use a toothbrush to clean the springs. A toothbrush is optimal for cleaning springs because it can reach those hard-to-reach areas. It is also effective in removing impurities hidden in spring water. Remember, if you allow dirt to build up on the springs, your weapon may become ineffective. So, clean it well.
Barrel Brush
Now it is time to clean the barrels. Use a brush to clean the barrel. Running a brush through these sections will fully remove any clogged debris. Also, make sure to use a dry rag to clean the outside of the barrel.
Pro Tips: Purchase cerakoted 80% AR lower if you want flexibility. For example, a cerakoted 80% lower AR highly resistant to scratches, bumps, and harsh weather. Thus, it can last for years to come.
Clean the Inside of the Barrel Using a Jag Pistol
The inside of the barrel can be cleaned using gun-based cleats (i.e., special design materials for cleaning the bore and barrel). So push the jag through the inside of the barre. Avoid dragging it. It will only push the dirt back into the barrel. The drill snake can be used to clean the inside of the barrel. A few patches will help you get the colour you need.
Grease Your Gun
After cleaning the gun, it must be properly oiled. Here, consider dipping the Q-tip in the recommended oil. Let the sliding rails oil. Do the same for all parts that look shiny. Also, the reverse spring must be oiled. However, do not over-oil this area. Be sure to remove excess oil. 4 to 5 drops is sufficient to oil the whole gun.
Reinstall, Dry
Reassemble your gun and take it for fire draining.
Underline
Don’t just stop at buy the right gun. you need to maintain it. Including cleaning it regularly. With regular cleaning, you can remove accumulated dirt and dirt. The above guide will help you clean your weapon properly.
